Channel Scan; Call Tones - Topcom TwinTalker 6800 Manual De Usuario

13.8 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press and
seconds for contiuous monitoring.
• Press to stop monitoring
PTT
13.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.
• Press
• Press
VOX sensitivity level which is indicated in the right corner of the display.
Press
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press

13.10 Channel Scan

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to
8.
• Press and hold
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN
pauses and you will hear the active signal.
• Press
deactivate channel scan.
When an active signal (one of 8 channels) is detected, press
channel and continue to search for another active channel

13.11 Call Tones

A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
• Press
• Press
Topcom Twintalker 6800
simultaneous to activate channel monitoring. Hold these buttons for 3
3 times.
to turn the VOX feature ON and press
until OF appears on the display, to turn VOX OFF.
. Press
to communicate through the active signal channel. Press
PTT
4 times. CA will be displayed.
or to select another call tone or select OF to enable call tones.
to confirm your selection and return to the standby mode.
PTT
briefly to start scanning.
or
Topcom Twintalker 6800
again to select the
.
PTT
to bypass the current
to
11