Main Technical Specifications; Specification; Worthy Information - Lacor 69116 Instrucciones De Uso Y Mantenimiento

MAIN TECHNICAL SPECIFICATIONS

MODEL:
VOLTAGE:
POWER:
PRESSURE:
BELL DIMENSIONS:
PUMP CAPACITY:
SEAL LENGTH:
SEAL WIDTH:
DIMENSIONS:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the bell-shaped
Vacuum Machine. We recommend all installation, operating and safety instructions appearing in
this manual to be read before installation or operation.
The bell-shaped Vacuum Machine is a product of extensive research and field testing. The
materials used were selected for maximum durability, attractive appearance and optimum
performance. Every unit is thoroughly inspected and tested before shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the bell-shaped Vacuum Machine into a properly grounded electrical outlet of the correct
voltage, size, and plug configuration. If the plug and receptacle do not match, contact a
qualified electrician to determine the proper voltage and size, and install the proper electrical
outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and allow
to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials.
4.- Leave a free space of at least 30 cm (12") for the frontal empying area to allow correct, safe
working.
5.- To prevent any injury or damage do not pull unit by power cord.

WORTHY INFORMATION

WARNING
!
69116
220-240V/50Hz
630 W.
0,9 bar
35x30x5 cm
5 m³/h
29 cm.
4 mm.
54x48x47 cm.
23 Kgr.
19