Idiomas disponibles
Idiomas disponibles
Before calling for service (cont.)
Drying time is not
consistent
clothing is not consistent.
Clothes take too
long to dry
too long.
tripped, or power outage has occurred.
Clothes are wrinkled
ends.
Clothes are shrinking
followed.
indicator light is
on during the drying
cycle
Water drips from
nozzle when Steam
Cycle starts
Steam does not
generate but no error
code is shown
Garments still
wrinkled after
in dryer.
STEAM FRESH™
There are no creases
left on garment after
wrinkles from fabric.
STEAM FRESH™
Garments have
static after REDUCE
STATIC
Garments are too
damp or too dry after
REDUCE STATIC
of heat used (electric, natural gas, or LP gas), the size of the load, the type of
fabrics, the wetness of the clothes, and the condition of the exhaust ducts and
lint filter.
longer to dry.
To help reduce and maintain more consistent drying times for large and heavy
fabrics, separate these items into smaller loads of a consistent size.
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.
lint, and obstructions. Make sure that outside wall dampers can open properly
and are not blocked, jammed, or damaged.
problem is a circuit overload, have it corrected by a qualified electrician.
tumbling action.
time, and remove items while they still retain a slight amount of moisture.
up to 3 hours.
your garment, because some fabrics will naturally shrink when washed. Other
fabrics can be washed but will shrink when dried in a dryer. Use a low or no
heat setting.
(3) Turn the dryer off then restart the Steam cycle.
work.
41
TROUBLESHOOTING
