Idiomas disponibles
Idiomas disponibles
ENGLISH
EASY MAINTENANCE AND CLEANING
Monthly cleaning and regular maintenance may help extend the life of your back support.
To clean cover
Remove the cover and turn it inside out. Close the zipper. Machine wash on warm cycle and drip or tumble dry on low heat. Do
not use industrial dryers. Do not steam autoclave. Do not bleach.
NOTE– To refit cover after washing–
After cleaning, insert the back foam into the cover and zip closed. The zipper on the cover should be towards the bottom and rear of the
foam. Using the Velcro® on the bottom flap of the cover attach the cover to the Velcro on the rear of the vanity flap. Ensure the foam fits
snugly to the back shell and match the Velcro strips on the top flap of the cover with the Velcro strips on the top rear of the shell.
NOTE– Use only Jay designated covers on Jay products
To Clean Back Shell
Shell may be wiped clean with soap and water. No other maintenance should be required.
J2 PLUS BACK WARRANTY
Each J2 Plus Back is carefully inspected and tested to provide peak performance. Every J2 Plus Back is guaranteed to be free from defects in
materials and workmanship for a period of 24 months from the date of purchase provided normal use. Should a defect in materials or
workmanship occur within 24 months from the original date of purchase, Sunrise Medical will, at its option, repair or replace it without charge.
This warranty does not apply to punctures, tears or burns, or to the back's removable cover. Claims and repairs should be processed through
the nearest authorized supplier. Except for express warranties made herein, all other warranties, including implied warranties of merchantability
and warranties of fitness for a particular purpose are excluded. There are not warranties, which extend beyond the description on the face hereof.
Remedies for breach of express warranties herein are limited to repair or replacement of the goods. In no event shall damages for breach of any
warranty include any consequential damages or exceed the cost of non-conforming goods sold.
We at SUNRISE MEDICAL have been awarded the
ISO-13485 certifi cate, which affi rms the quality of
our products at every stage, from R & D to
production. This product meets the requirements in
accordance with EU regulations. Options or
accessories shown are available at extra cost.
The varieties of backrest fi tting variants, as well as
the diff erent positioning components to deliver
postural support, pressure distribution, increase
seating tolerance are benefi ts according to each
user requirement and indication, mean that it can
be used by a range of users with diff erent
positioning needs and indications as follows:
- Spinal Cord Injury
- MS
- Neurological disease pattern
(hemiplegia, M. Parkinson)
- Tetraplegia
- Amputation
- Extremity defect deformity
- Cerebral Palsy
- Joint contracture
- Muscle Dystrophy
No contraindications are known or available.
NOTE: General user advice. Not following these instructions may result in physical injury, damage to the product or damage to the environment!
A notice to the user and/or patient that any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent
authority of the Member State in which the user and/or patient is established.
As the manufacturer, SUNRISE MEDICAL, declares that this product conforms to the Medical Device Regulation (2017/745).
B4Me special adaptations
Sunrise Medical strongly recommends that in order to ensure that your B4Me product operates, and performs as intended by the manufacturer; all the user information
supplied with your B4Me product is read and understood, before the product is fi rst used. Sunrise Medical also recommends that the user information is not discarded
after reading it, but it is kept safely stored for future reference.
Medical Device Combinations
It may be possible to combine this Medical device with one or more other Medical Device or other product. Information on which combinations are possible can be found
at www.Sunrisemedical.co.uk. All combinations listed have been validated to meet the General Safety and Performance Requirements, section 14.1 of the Medical
Device Regulation 2017/745.
Guidance on the combination, such as mounting, can be found at www.SunriseMedical.co.uk.
J2 Plus Back 255197
E A S Y M A I N T E N A N C E A N D C L E A N I N G
J 2 P L U S B A C K WA R R A N T Y
1
Type:
Product Name
LOT: defi ned
2
Date:
by Julian Date
Seat width
XXX mm
Seat depth
XXX mm
kg
Max user
weight
XXX kg
8
CE Mark
Date of
XXXX-XX-XX
Manufacture
Assembly Part
Part Code
Number
This symbol
means Medical
Device
Manufacturer
European
Authorised
Representative
Rev.C
