Idiomas disponibles
Idiomas disponibles
INSTALLATION ONLY AS POWER SUPPLY
Using one or more sources to supply power to your sound equipment
without using batteries:
Charging tips
For a good result, it is recommended that the current applied does not exceed
10% of the battery capacity.
▪ Safe charging: Use the SLOW charge mode to provide a deeper charge and
increase the lifetime of the battery.
▪ Battery Bank: If the battery bank totals 250A, to current of 25A is now
recommended for slow charging, equivalent to 10% of the battery capacity.
▪ Charged battery: When the voltage is 14.4V and the current is less than 1%
of the battery capacity, it is charged.
▪ Monitoring: As the power supply has no voltage/current display, a voltmeter
and an ammeter are needed to monitor this process.
▪ Best results: It is recommended to keep the battery powered at 14.4V for
another 8 hours after reaching 1% of battery capacity.
To use the power supply as a non-battery power supply, make
sure that the total consumption of the powered equipment
does not exceed the rated current supplied by the power
supply. If the peak consumption exceeds this value, the power
supply will trigger protection.
NEGATIVE: 2 AWG
POSITIVE: 2 AWG
Amplifier and
other devices
19
