Idiomas disponibles
Idiomas disponibles
CLEANING THE LOADING DOOR AND THE DRUM
For products with drum cleaning program, please see Operating the product - Programs.
For products without drum cleaning, follow the below steps to clean the drum:
Select Additional Water or Extra Rinse auxiliary functions. Use a Cottons program without pre-
wash.
Set the temperature to the level recommended on the drum cleaning agent which can be
provided from authorized services. Apply this procedure without any laundry in the product.
Before starting the program, put 1 pouch of special drum cleaning agent (if the special agent could
not be supplied, put max. 100 g of powder anti-limescale) into the main wash detergent compartment
(compartment no. "2"). If the anti-limescale is in tablet form, put only one tablet into the main wash
compartment no. "2".
Dry the inside of the bellow with a clean piece of cloth after the program has come to an end.
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains on the
drum surface by using cleaning agents for stainless steel. Never use steel wool or wire
wool.
WARNING: Never use sponge or scrub materials. These will damage the painted and
plastic surfaces.
CLEANING THE BODY AND CONTROL PANEL
Wipe the body of the machine with soapy water or noncorrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
88
