Idiomas disponibles
Idiomas disponibles
4. Unscrew the red ignitor button on
the control box and insert the AA
battery (16) with the POSITIVE end
facing outwards.Then attach the
control box (2) underneath the
middle plate (3) with screws (18).
18
6. Attach the reflector (8) onto the upper
plate (4) and fix with screws (18).
5. Carefully put the glass tube (7) up
through the center of the hole in the
upper plate (4).Make sure the rubber ring
(17) is attached on the lower end of the
glass tube. Now place the glass tube
through the hole on the middle plate (3).
Check to ensure the glass tube covers
the center hole of the middle plate.
16
15
24
17
