RS Pro RS-836 Manual De Instrucciones página 4

Heavy Duty InfraRed Thermometer with Circular Laser Targeting / English
7.Front Panel Description
1. IR sensor
2. LCD display
3. Up button
4. Down button
5. Mode button
6. Measurement trigger
7. Handle grip
8. Battery cover
7-1.Indicator
1. Scan symbol
2. Data hold
3. Laser "on" symbols
4. High alarm and low alarm symbol
5. ºC/ºF symbol
6. Low power symbols
7. Emissivity symbol
8. Emissivity value
9. Temperature values for the MAX MIN
DIF AVG Type-k
10. Symbols for MAX MIN DIF AVG
11. Symbol for Type-K
12. Current temperature value
4
Heavy Duty InfraRed Thermometer with Circular Laser Targeting / English
7-2.Buttons
1. Up button (for EMS, HAL, LAL)
2. Down button (for EMS, HAL, LAL)
3. MODE button
(for cycling through the mode loop)
8. Functional Design
1. In the measuring time, up and down keys to adjust the Emissivity.
2. In the hold time, up keys to turn on or off the laser Down keys to turn on or off the
backlight
3. In the hold time, MODE button to change MAX/MIN/DIF/AVG.
4. In the measuring time, if the TYPE-K thermocouple is connected, the Type-K data will
displays in the lower left quarter automatically. In this time, cannot change MAX/MIN/DIF/
AVG.
5. To set values for the High Alarm (HAL), Low Alarm (LAL) and Emissivity (EMS), press and
hold the MODE button until the appropriate code appears in the display, press the UP and
down buttons to adjust the desired values.
9. MODE Button Function
• Press the mode button also allows you to access
the set state, Emissivity(EMS), C/F, HAL on/off,
HAL adjustment LOW on/off, LOW adjustment,
Each time you press set you advance through the
mode cycle.
• The diagram shows the sequence of functions in
the mode cycle.
• EMS adjustment. The Emissivity(EMS) digitally
EMS
°C/°F
HAL on/off
MODE
HAL
LOW on/off
LOW
5