- GB -
Opening the housing
F
• Undo the screws on the bottom section of the housing and remove the top section of the housing from the bottom
section.
Removing the aerator motor
How to proceed:
5.
0.
G
1. Unscrew the screws from the base of the aerator motor.
− Slightly bend the membrane clip sideways if necessary.
2. Remove the aerator motor.
− There will be initial resistance caused by the two air outlets fastened to the housing.
Replace membranes
How to proceed:
3.
0.
H
1. Undo and remove the nut from the membrane clip.
2. Hinge the membrane clip to the side.
3. Fit the new membrane.
4. Fit the screws.
5. Close the membrane clip.
6. Fit the nut and tighten.
Fitting the aerator motor
7.
How to proceed:
0.
I
1. Place the aerator motor into the housing.
− Ensure that the air outlets are equipped with sealing rings.
− During fitting, there will be initial resistance from the two air outlets.
2. Screw the aerator motor in place.
Closing the housing
J
• Place the top section of the housing onto the bottom section and screw on.
− Ensure that the strain relief of the power connection cable is correctly located in the recess of the housing.
Storage/Over-wintering
When the unit is in continuous operation it can remain in place at freezing temperatures.) Otherwise store the unit
indoors in a dry room (room temperature).
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Guarantee conditions
PfG grants a 2 year guarantee from the date of sale on proven material and manufacturing faults. Prerequisite for our
guarantee is the presentation of the purchase receipt. Our guarantee will become null and void if the unit is misused,
electrically or mechanically damaged by inappropriate use and improper repair by non-authorised workshops. Repairs
are reserved for workshops authorised by PfG or by PfG itself. In the case of warranty claims, please return the defec-
tive unit or part freight paid to PfG together with a description of the fault and the purchase receipt. PfG reserves the
right to invoice repair costs. PfG is not liable for transport damage. Any damage must be claimed against the carrier.
Further claims of whatever type, especially consequential damage, are excluded. This guarantee does not affect the
final customer's claims against the dealer.
12
23589-02-14_GA_PondoAir Set 200-12 12
13.02.2014 13:48:09