Blumfeldt Fireball 10034933 Manual Del Usuario página 12

Idiomas disponibles
  • ES

Idiomas disponibles

EN
12
SAFETY INSTRUCTIONS
WARNING
Risk of suffocation! This fire bowl is for outdoor use only and
shall not be used in a building, garage or any other enclosed
area. Toxic carbon monoxide fumes can accumulate and cause
asphyxiation.
This fire bowl is not for commercial use.
This fire bowl should only be used by adults and all children and pets
should be kept at a safe distance.
Do not use petrol, white spirit, lighter fluid, alcohol or other similar
chemicals to light a fire as a rapid increase in temperature could damage
the fire bowl. This fire bowl is only suitable for use with charcoal,
untreated wood or dry logs. Do not use coal.
Do not use this fire bowl until it is completely assembled and all parts are
securely fastened and tightened.
Do not use the fire bowl on decking or any other flammable surfaces such
as dry grass, wood chips, leaves.
Always empty this fire bowl after use. Leave a thin layer of ash to protect
the bottom. Do not remove ashes or charcoal until they are completely
and fully extinguished.
Do not touch the fire bowl until it is completely cooled unless you are
wearing heat resistant gloves as it is hot when in use.
Do not handle or move the fire bowl when in use as it is hot.
Do not attempt to store the fire bowl until all ashes and charcoals are
completely extinguished.
Always use a safety tool and heat resistant gloves when adding or moving fuel.
Do not leave a burning fire unattended.
Fire hazard-Hot embers may emit while in use.
Do not overload the fire bowl with fuel. Do not add additional fuel until
the fire burns down. If an portion of the fire bowl is growing red, it is
overloaded.
Do not burn fuel directly on the fire bowl base.
Do keep the fuel away from the wall of the fire bowl as the high
temperature may damage it.
Avoid breathing smoke from the fire and avoid getting it into your eyes.
Always thoroughly inspect the fire bowl before use.
A slight discolouration of finish may occur after use.
loading