TREVIDEA G3 Ferrari G20088 Manual De Uso página 11

installing or removing any accessory or attachment.
To clean the immersion cone and the accessories, it is
recommended using warm tap water and containing the
use of detergents. When cleaning with detergents, rinse
thoroughly.
Do not immerse the top of the mixer in water or other
liquids, clean it with a damp cloth.
PARTS G20088
2. Switch low speed
5. Plastic beaker
OPERATING
STAINLESS STEEL IMMERSION SHAFT
- Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the shaft"
section. Plug the unit to the electrical outlet.
- Insert mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid splashing).
- Press the button (speed I or II) to start operating. For best results, follow the instructions in "Setting
processing speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
- Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ... When processing fruits or vegetables, add also a small
quantity of water to allow the device to operate in a homogeneous way.
Insert motor body (4) in the shaft (6). Rotate anticlockwise until it blocks. For unblocking, rotate clockwise.
SETTING THE WORKING SPEED
The unit features two working speeds (2 and 3 button).
For best results and to avoid overheating, it is recommended to use the unit for short and regular intervals,
then for a long time, always making circular movements inside the container of food. It is also recommended
to start processing food from the first speed, ending up using the faster speed.
CLEANING
- Unplug the unit from the electrical outlet.
Do not immerse the motor body in water or other liquids, but wash it with a damp cloth and non-abrasive
detergent. Avoid any infiltration of water inside the motor housing.
Shaft, blades and accessories can be washed like normal dishes, with a non-abrasive sponge and mild
detergent. Dry them thoroughly before assembling them to the main body.
For a quick cleaning of the blades of the shaft during different processes, insert the hand blender into a cup
filled with water and operate for a few seconds.
TECHNICAL FEATURES
•
Power supply: AC 220-240V~50-60Hz. 700W
•
2 working speeds, Ergonomic motor housing
•
Detachable stainless-steel shaft
3. Switch high speed
6. Stainless steel immersion shaft
Assembling the shaft
4. Motor body
7. Blades
10