Idiomas disponibles
Idiomas disponibles
ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING INSTALLATION AND COMMIS-
SIONING, ADJUSTMENTS AND PART REPLACEMENT
During appliance installation, commissioning, adjustment and part replacement procedures,
watch out for the following hazards and provide for the countermeasures indicated below:
► Source of hazard: Appliance mechanics
Hazard
Risk
of
crushing
parts of the body in
case of fall of the ap-
pliance
Risk of cutting due
to sharp edges
Risk of crushing
parts of the body
in case of fall of the
appliance
NOTE
: Only applies to electrical appliances.
► Source of hazard: Electric power
Hazard
Risk
of
electric
shock caused by
live components
6
Where or in which situations
does the hazard occur?
When the appliance is lifted
When handling sheet-metal
parts
In case of uneven or sloped
fl oors
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Pay attention to the centre
of gravity
• Avoid collisions
• Pay special care during this
activity
• Wear personal protective
equipment in accordance
with safety regulations
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" on page 10 of
the installation manual.
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Disable the power supply
before removing the pro-
tections
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual.
SAFETY
Safety
device
None
None
None
Safety device
• P r o t e c t i o n
panels
• S y s t e m
s w i t c h - d i s -
connector
3378610_ut_GB
