Idiomas disponibles
Idiomas disponibles
PRE-INSTALLATION
Recommendations
• The installation must be performed by qualified personnel and complying with the standards
in force in the country.
• Place the hot and cold water plugs at an approximated distance of the ones specified (Fig.1)
leaving connections of ½" male.
• It is advisable to put safety taps in the water circuits
• Before performing the column connection, it is recommended to clean the pipes by letting
the water flow in the pipes for some time in order to avoid later damages caused by detritus
and dirt accumulated in the pipes (Fig. 2).
C
H
• The tap water pressure shouldn't exceed 5 bars and the hot water temperature shouldn't
exceed 55ºC. It is mandatory to respect these limits, as its failure may damage the
equipment. Consult your installer for this matter if you have any question.
• The hydromassage cabin works properly with a 2,5 bar pressure. An extremely low pressure
or insufficient flow may cause anomalies in its functioning and lost of the hydromassage
effects.
•It is recommended to carry out the hot and cold water installation with 20 mm tubes to
guarantee the proper flow to the correct functioning of the hydromassage elements.
• The hydromassage cabins are equipped with water hoses of 700mm length with a connec-
tion of ½" female.
16
