Idiomas disponibles
Idiomas disponibles
HDL 1400
Step 6
Connect the hose to the water outlet. Insert it until you hear a click, pull down to check that it is well attached.
Step 7
Screw the quick connector with filter into the water inlet of the pressure washer Before screwing the connector to the
male union, remove the plastic cap that is inserted for transport. This plastic cap can be disposed of once removed.
After both components have been installed, connect the garden hose with a quick connector suitable for the hose you
are going to use. Connect the hose to the fauce
INSTRUCTIONS
After connecting the appliance to the water outlet, follow the instructions
- Make sure the switch is off
- Connect the hose
22
