Idiomas disponibles
Idiomas disponibles
If battery pack is not still charged properly, take or send charger (and battery pack) to the closest
certified Service Center.
Under certain conditions, with the charger plugged into the power source, the exposed charging
contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive
nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be
kept away from charger cavities. Always unplug the charger from the power source when there is no
battery pack in the battery compartment. Unplug charger before attempting to clean.
Do not freeze or immerse charger in water or any other liquid.
WARNING
Don't allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of the
battery pack after use, avoid placing the charger in a warm environment such as in a metal shed, or an
uninsulated trailer.
CAUTION
Never attempt to open the charger for any reason. If the plastic housing of the charger breaks or cracks,
return to the closest certified Service Center.
NOTE
This product is not user serviceable. There are no user serviceable parts inside the charger. Servicing at
the closest certified Service Center is required to avoid damage to static sensitive internal components.
READ ALL OF THE INSTRUCTIONS IN THE BATTERY CHARGER SECTION OF THIS MANUAL
BEFORE ATTEMPT TO CHARGE THE BATTERY PACK FOR YOUR TOOL.
Always use correct battery pack (pack supplied with tool or replacement pack exactly like it.) Never
install any other battery pack. It will ruin your tool and may create a hazardous condition.
CAUTION
A Lithium-ion battery pack can remain in the charger without damaging the battery or the charger.
The battery will remain fully charged in the charger.
If you remove the battery pack from the battery compartment before the battery is fully charged, it
will not cause any damage to the battery.
If several charging operations are performed consecutively, the charger can become warm. It is
normal and does not indicate any technical defect.
The efficiency of discharge of the battery will decrease in the low temperature. When the circumstance
temperature is lower than -10°C, the battery pack will shut down automatically and it is normal that the
power tool is unable to use.
The internal temperature of the battery will continuously increase in repeatedly high power operation or
overload. If the pack is overheated, it will disconnect automatically. The power tool does not work until
the temperature goes down to the normal temperature.
CAUTION
the battery pack cells. If this leakage gets on your skin, please wash affected part immediately and observe
any skin reaction. If necessary, please seek medical attention.
1English1
IMPORTANT BATTERY PACK NOTES
DO NOT USE THE BATTERY PACK if it is damaged and liquid is leaked from
English
-8
