Inglesina APTICA Manual De Instrucciones página 34

subsequent indications.
• The Inglesina Customer Care Service can provide any
information, following written request by filling out the
form provided on the website: inglesina.com - Warranty and
Assistance section.
HINTS FOR CLEANING AND MAINTAINING THE PRODUCT
• This product requires regular maintenance by the user.
• Never force any mechanisms or moving parts; in case of
doubt, check the instruction first.
• Do not store the product if it is still wet and do not leave it
in humid environments since mildew may form.
• Store the product in a dry place.
• Protect the product against weather agents, water, rain
or snow; moreover, continuous and prolonged exposure to
sunlight can cause changes in the colour of many materials.
• Should the product be used on the beach, carefully clean
and dry it afterwards in order to remove sand and salt as they
may cause rusting.
• Clean the plastic and metal parts with a damp cloth or with
a mild detergent; do not use solvents, ammonia or benzine.
• Carefully dry metal parts after any contact with water to
prevent the formation of rust.
• Keep all moving parts clean and, if necessary, lubricate
them with light oil.
LIST OF COMPONENTS
fig. 1
APTICA CHASSIS
A Rear wheels
B Front wheels assembly
APTICA CARRYCOT
C Hood lining
D Carrycot apron
ALL SEASON STROLLER
E Stroller seat
F Comfort Cover
G Handrail
J Hood
ACCESSORIES
H Feeding bottle holder
K Storage basket
L Muff (if available)
M Rain cover (if available)
CAB 0+ / DARWIN INFANT / DARWIN INFANT RECLINE
CAR SEAT (IF AVAILABLE)
STANDUP (IF AVAILABLE)
CHASSIS
CHASSIS OPENING
fig. 2 Holding the lever (T1) down, lift the chassis firmly
until it opens completely.
fig. 3 Caution: ensure that all locking mechanisms
are properly engaged on both sides before use and that
none of the red indicators are visible.
34
• It is recommended to wash the lining separately from other
items.
• Periodically revive the fabric parts using a soft clothes
brush.
• Follow the lining washing instructions on the labels.
• Dry the textile lining completely before using or storing it.
• To prevent formation of mildew, it is advisable to air the
carrycot periodically. In particular, separate the textile lining
from the structure and run a dry cloth over the bottom.
INSTRUCTIONS
ASSEMBLING/REMOVING THE REAR WHEELS
fig. 4
chassis and push them until they click into place.
fig. 5
attached before use.
Should it be necessary, the rear wheels can easily be removed.
fig. 6
and at the same time extract it from its seat on the chassis.
REMOVING/ASSEMBLING THE FRONT WHEEL ASSEMBLY
Should it be necessary, both front wheel assemblies (B) can
easily be removed.
fig. 7
assembly out from its housing in the support.
fig. 8
clicks into place.
fig. 9
attached before use.
CLOSING THE CHASSIS
fig. 10
the rear handle (T3) until the chassis closes completely.
Caution: always check that the chassis is closed correctly.
fig. 11
(T3).
Never lift the chassis by the handlebar.
REAR WHEELS BRAKE
fig. 12
fig. 13
Always engage the brake during stops.
BLOCKING/UNBLOCKING THE FRONT WHEELS
The chassis features swivel wheels.
fig. 14
aligned, then operate the lever (B2) located on both front
wheel units.
HINTS FOR CLEANING THE TEXTILE LINING
Handwash in cold water
Do not bleach
Do not tumble dry
Dry flat in shade
Do not iron
Do not dry clean
Do not spin-dry
Insert the rear wheels (A) into the seats on the
Caution: make sure that the wheels are properly
To remove the rear wheel (A) act on the lever (A1)
Pushing the small button (B1), pull the wheel
To reinstall it, simply position it and push it until it
Caution: make sure that the wheels are properly
Press the button (T2) and simultaneously rotate
To transport the closed chassis, use the rear handle
To operate the brake, press on the centre lever (T4).
To release the brake, lift the centre lever (T4).
To lock or unlock them make sure they are correctly