NEO TOOLS 94-001 Manual De Uso página 19

4. Power Switch
It can be used to turn on/off the meter.
5. Function/Range Switch
This switch can be used to select desired function and range.
6. „10A" Jack
Plug-in connector for the red test lead for current ( 200mA~10A )
measurements.
7. „COM" Jack
Plug-in connector for black (negative) test lead.
8. „INPUT" Jack
Plug-in connector for the red test lead for all measurements except current (≥ 200mA ) measurements.
„ " Button
To turn on or off the backlight, press and hold this button for about 2 seconds.
The backlight will turns off automatically about 15 seconds later
after you turn on it.
9. Button
After pressing the button, the present reading is held on the display, meanwhile
on the LCD as an indicator. To exit the Hold Mode, press the button again and the indicator
disappear.
10. Button
To hold the maximum value, press this button, and
the maximum value of all readings taken since the button was pressed. To exit the maximum value hold
mode, just press this button gain, and
In some ranges, the maximum value hold mode is not available.
GENGRAL SPECIFICATION
Display: LCD, 1999 counts, updates 2-3 times/sec
Overrange Indication: „OL" shown on the display
Battery: 1.5V X 3, AAA
Polarity Indication: „-" displayed automatically
Low Battery Indication:
Operating Temperature: 0°C to 40°C, <75%RH
Storage Temperature: -10°C to 50°C, <85%RH
Dimensions: 158 X 75 X 35 mm
Weight: about 200g (including battery)
SPECIFICATIONS
Accuracy is specified for a period of one year after calibration and at 18°C to 28°C, with relative humidity
< 75%.
will disappear.
shown on the display
19
will appear as an indicator, the meter will hold
neo-tools.com
is displayed
will