Idiomas disponibles
Idiomas disponibles
Available functions
- Speed
Switch on/Speed increase:
- press button 1 to switch on the hood
- press button 1 to go to the next speeds, until the hood is
switched off
The extraction speed is shown on the display (c), in the
following manner:
La velocità di aspirazione verrà visualizzata sul diplay (c),
nel seguente modo:
1
speed – performance 40% ***.
st
2
speed – performance 60% ***.
st
3
speed – performance 80% ***.
st
high speed performance 100% ***.
OFF.
*** the percentage displayed refers to the indicative value
of the performance.
The high speed is timed for 10 minutes; to interrupt the
timing and switch off the hood press button T1.
NB= the speed might increase automatically during use,
this is because the control is fitted with a system that
protects the display in case of over temperatures.
- Clock
To set the clock:
- press button T3 until moving the indicator(b) on function
"CLOCK"
- press button T4 to access clock setting
- keep button T4 pressed:
• keeping it pressed for one second increases the time by
one minute
• after 10 seconds, each second it is pressed increases the
time by 10 minutes.
To store the set time:
- press button T3
- Timer
Stopwatch Function
- press button T3 until moving the indicator(b) on the
"TIMER"function
- press button T4 to access timer setting
- to start the stopwatch: simultaneously press button T3
and button T4, for 5 seconds
- to stop the stopwatch: simultaneously press button T3
and button T4, for 5 seconds
Note= after 60 minutes the stopwatch stops automatically.
- "Countdown" Function
- press button T3 until moving the indicator(b) on the
"TIMER" function
- press button 4 to access timer setting
To set the "Countdown" timer:
- keep button T4 pressed:
• keeping it pressed for one second increases the timer by
one minute
• after 10 seconds, each second it is pressed increases the
timer by 5 minutes
To save the "Countdown" timer
- press button T3
The Timer indicator (b) will start flashing to indicate the
start of the "Countdown".
When the "Countdown" reaches "0:00" the motor is
switched off.
Note = to set a new timer, button T4 must be pressed until
the indication "0:00" is displayed again.
Note = the maximum countdown setting time is 60 minutes.
- Grease filter
Display percentage of utilisation:
- press button T3 until moving the indicator(b) on the
"GREASE FILTER" function
- press button T4 to display the percentage of utilisation of
the grease filter.
Grease filter reset warning
The grease filter warning is displayed after 40 hours of
utilisation with the wording RESET" (e) next to the
"GREASE FILTER" function.
When this warning is displayed the grease filter must be
washed.
After performing maintenance:
- press button T3 until moving the indicator(b) on the
"GREASE FILTER" function.
- press button T4, for 5 seconds, to disable the warning and
restart the grease filter efficiency percentage counting.
- Odour Filter
Display percentage of utilisation:
- press button T3 until moving the indicator(b) on the
"ODOUR FILTER" function
- press button T4 to display the percentage of utilisation of
the carbon anti-odour filter
- Carbon anti-odour filter reset warning
The carbon anti-odour filter warning is displayed after 160
hours of utilisation with the wording "RESET"(f) next to the
"ODOUR FILTER" function.
When this warning is displayed the carbon anti-odour filter
must be washed or replaced (depending on the model you
have).
After performing maintenance:
- press button T3 until moving the indicator(b) on the
"ODOUR FILTER" function
- press button T4, for 5 seconds, to disable the warning and
restart the carbon anti-odour filter efficiency percentage
counting.
4
V.1
