Resumen de contenidos para System Build 3915412COM
Página 1
3915412COM Tall Cabinet B343915412COM1 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first.
Página 2
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR...
Página 3
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
Página 4
Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. systembuild.com Tube...
Página 5
Board Identification Not actual size Shelf (x2) 33915412030 Right Panel Left Panel 33915412020 33915412010 Door Bottom Adjustable Shelf (x2) 33915412061 33915412040 33915412050 This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. Back Panel K391541200 systembuild.com...
Página 6
Board Identification Not actual size systembuild.com Tube...
Página 7
Part List Actual Size (x8) (x8) (x4) (x8) (x8) #A22700 #A22710 #A23030 #A12420 #A21670 cam lock cam bolt confirmat screw 5/8" screw wood dowel (x8) (x36) (x4) (x2) (x2) #A80250 #A21110 #A12930 #A89370 #A17400 shelf support nail 1-1/8" screw 7/8" bolt door bumper Not Actual Size (x3)
Página 9
STEP 2 Quick Assembly (x8) (x8) (x1) Proper orientation of CAM LOCK NOTE: You have two parts C (shelf), on Do not fully tighten screw. one of them you will attach the safety bracket (5a). systembuild.com Tube...
Página 10
STEP 3 finished edges face up systembuild.com Tube...
Página 11
STEP 4 finished edges face up systembuild.com Tube...
Página 12
STEP 5 (x4) finished edges face up systembuild.com Tube...
Página 14
STEP 7 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. Carefully turn your unit on its front side. Attached the back panel as shown nailing straight into the raw edges. (x36) surface Assure that our unit is square.
Página 15
STEP 8 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
Página 16
STEP 9 (x8) finished edges face out systembuild.com Tube...
Página 18
STEP 11 NOTE: This view shows the door being mounted to the left panel for Left Hand door. The door can also be mounted to the right panel for a Right Hand door. systembuild.com Tube...
Página 19
STEP 12 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
Página 20
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0.0 kg 30 lbs 13.6 kg 35 lbs 15.9 kg 30 lbs 13.6 kg 35 lbs 15.9 kg...
Página 21
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
Página 22
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
Página 23
Español Página 14 IMPORTANT: El Panel trasero es una parte estructural de la unidad y debe ser instalado correctamente. Gire cuidadosamente su unidad en su parte frontal. Unido el panel posterior como se muestra clavando directamente en los bordes crudos. Asegúrese de que la unidad es cuadrada.
Página 24
Español Página 18 NOTA: Esta vista muestra la puerta que se monta en el panel izquierdo de la puerta izquierda. La puerta también se puede montar en el panel derecho para una puerta de la mano derecha. Página 19 Para ajustar la altura vertical: Afloje los tornillos "A"...
Página 25
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
Página 26
Français Page 14 IMPORTANT: Le panneau arrière est une partie structurelle de cet appreil et doit être installé correctement. Tournez soigneusement votre appareil sur son côté avant. Attaché le panneau arrière comme indiqué clouage directement dans les bords bruts. Assurez-vous que l’appareil est carré. La distance d’un coin à...
Página 27
Français Page 18 REMARQUE : Cette vue montre la porte montée sur le panneau de gauche pour la porte de gauche. La porte peut également être montée sur le panneau de droite pour une porte de droite. Page 19 Pour ajuster la hauteur verticale : Desserrez les vis "A"...