Quick Start; Connecting The Drum Module; Selecting A Kit; Playing The Pads - Alesis DMLITE Guia Del Usuario

User Guide (English)
Support
For complete system requirements, compatibility information, and product registration, visit the
Alesis website: alesis.com.
For the latest information about this product, visit alesis.com/dmlitekit.
For additional product support, visit alesis.com/support.

Quick Start

Connecting the Drum Module

Connect the cable snake here (using the two
screws to secure it), and then connect the 1/4"
ends of the cables to their respective pads.

Selecting a Kit

To select one of the module's 10 preset Kits, do one of the following:
• Press the Variation Button so it is lit red,
and then press the 1, 2, 3, 4, or 5 Button to
select Kit 1, 2, 3, 4, or 5 (respectively).
• Press the Variation Button so it is lit green,
and then press the 1, 2, 3, 4, or 5 Button to select Kit 6, 7, 8, 9, or 10 (respectively).
The Kit number will appear in the display. Once you have selected a Kit, you can select others
by repeating one of the steps above or by using the – and + Buttons.

Playing the Pads

If your electronic drum kit has velocity-sensitive pads, this drum module will play sounds of
varying timbres depending on how hard you hit the pads. Try hitting the pads with different
amounts of force to experiment with the different sounds produced by the module!
Note: The hi-hat sound will vary based on the position of the hi-hat controller pedal:
•
Open hi-hat: With your foot off of the pedal, hit the hi-hat pad.
•
Closed hi-hat: With your foot pressing the pedal all the way down, hit the hi-hat pad.
•
Pedal close: Press the hi-hat pedal all the way down without hitting the hi-hat pad.
•
Splash: Quickly press the hi-hat pedal all the way down, and then release it
immediately.
Learn more about using the drum module in the Using the Module section of this manual.
1 2
3
3 4 5
VARIATION