Idiomas disponibles
Idiomas disponibles
replacing the bulb
Q
WArNING!
Pull the adapter
any tasks on the product.
j
Release the screws
using a screwdriver (see Figure B).
j
Take off the halogen bulb
Figure B).
j
Retighten the screws
Maintenance / Cleaning / Care
Q
J
trIC ShOCK! Before doing any work on the prod-
uct, pull the adapter
j
Ensure that the water level never drops below the MIN marking
(inside) wall of water container
j
Fill up or change the "distilled" water when the water level is be-
low the MIN mark (see "Changing the water"). Check the water
level by slightly raising the base
namental stone
mains socket, then the water level is probably too low.
j
Change the "distilled" water at least once a week (see "Chang-
ing the water"). This will prevent algae from forming.
j
Check and clean the tabletop fountain, pebbles
tainer
and pump
12
sive or corrosive cleaning agents to do this. Ensure that no foreign
bodies can enter the pump
j
Pour out the water and allow the tabletop fountain to dry com-
pletely if you are going to leave it unused for an extended period
(see "Changing distilled the water").
... / Use / Maintenance / Cleaning / Care
rISK tO LIFE FrOM ELECtrIC ShOCK!
out of the mains socket before performing
11
on the lamp attachment assembly
17
18
using a screwdriver.
17
WArNING!
, and the mains adapter
2
at regular intervals. Never use aggres-
8
. Insert a new halogen bulb
DANGEr tO LIFE FrOM ELEC-
out of the socket.
11
.
12
. If no water flows from the or-
6
11
or the connection hose
8
1
(see
18
is connected to a
, water con-
13
.
7
GB/MT
51
