Idiomas disponibles
Idiomas disponibles
EN
PARAMETRI
se.f.
17
EL.T.
18
ST.P.
19
EN.C.
20
NE.P.
21
DE.F.
22
To set the default values: 1) access the advanced programming
function; 2) select the "dEf" parameter"; 3) activate the modification
mode ("0" on display"); 4) accept the modification (press "MENU"
and hold it down). A countdown should now appear: 49,48...,1
down to "don". Release the button when finished.
To use both colours of a two-colour LED strip, make the connections
as explained in the CTLIGHT instructions and modify parameters
FP.r. as required (setting 2 or 3).
30
DESCRIZIONE
Enabling of continuous flashing indicating
service required with se.r. ≠ 0 (only active with gate
closed).
0 = off
1 = on
Electric lock activation time in seconds
High-speed motor start-up.
0 = on
1 = off
1 = Off (use of virtual encoder)
2 = On (use of motor's physical encoder)
1 to 10 pulses per revolution of the physical encoder
0 = Restore of factory settings for sliding gate motor
SC4224
1 = Restore of factory settings for sliding gate motor
SUN4224
2 = Restore of factory settings for sliding gate motor
SUN7224, SC7224
3 = Restore of factory settings for sliding gate motor
SUN11224, SC11224
4 = Factory setting restore for 4/6 mt barrier and up-
and-over door
5 = Factory setting restore for 8 mt barrier
DEFAULT
MIN MAX UNITÀ
0
4
0
1
4
0
To use just one colour of a LED strip, make the connections as
explained in the CTLIGHT instructions and modify parameter IN.D.
as required (setting 5 or 6); parameter FP.r. cannot be set on 2
or 3.
* = The default value for barriers is 3
SL/BA/
0
1
OH
SL/BA/
1
10
s
OH
SL/BA/
0
1
OH
SL/BA/
1
2
OH
SL/BA/
1
10
OH
SL/BA/
0
5
OH
