YATO YT-85720 Manual De Instrucciones página 11

Aspiradora multiuso para estanques
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
PRODUCT OVERVIEW
The multifunctional vacuum cleaner is an industrial vacuum cleaner designed for cleaning workplaces from dry and wet debris
which a domestic vacuum cleaner would not be able to cope with. Thanks to its special features, the vacuum cleaner can also
be used for cleaning ponds and as a dust extraction system when interoperating with other power tools. The capacious tank and
the fl exible hose allow for reaching hard-to-reach places and clean them thoroughly. The base equipped with wheels enables
easy transport of the vacuum cleaner. The vacuum cleaner is equipped with replaceable air fi lters. The correct, reliable, and safe
operation of the tool depends on its proper use, therefore:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
specifi ed in this instructions manual.
PRODUCT EQUIPMENT
The product is delivered complete but requires assembly before use. The product is supplied with: fi lters, fl exible hose, extension
tubes and suction nozzles.
TECHNICAL DATA
Parameter
Catalogue No.
Mains voltage
Mains frequency
Rated power
Working negative pressure
Tank capacity
Insulation class
Protection rating
Weight
GENERAL SAFETY CONDITIONS
The device may be used by children of 8 years of age and over and persons with reduced
physical, sensory or mental capabilities, including persons with no experience and knowl-
edge, provided they are supervised, have received instructions concerning safe use and
understand the hazards. Children should be supervised to ensure that they do not play with
the device. Cleaning and maintenance should not be carried out by unsupervised children.
The vacuum cleaner is designed for dry and wet work. The vacuum cleaner must be kept
under supervision at all times during operation. Follow the instructions contained in this man-
ual before commencing work consisting in suctioning water or wet debris. Failure to observe
them may result in an electric shock, which may pose a threat to the health and life of the
user and bystanders. It is forbidden to suck wet debris other than water. Drawing in paints,
oils, solvents, petrol and other fl ammable substances can lead to irreparable damage to the
vacuum cleaner or its components, as well as present a risk of electric shock, fi re or explo-
sion. Before changing the type of work, always empty and clean the vacuum cleaner tank
and dry it. Debris remaining in the tank after previous work may disturb the work in the event
of a change of its nature. Never draw in hot, glowing or burning objects. This can lead to fi re
or explosion and expose the user to serious injury or death. The maximum temperature of
suctioned waste must not exceed 40°C. The device is intended for use in closed rooms and
should not be exposed to water, including precipitation.
O R I G I N A L
EN
Unit
[V~]
[Hz]
[W]
[kPa]
[l]
[kg]
I N S T R U C T I O N S
Value
YT-85720
220 – 240
50/60
1400
18
30
II
IPX4
2.8
11
loading