bitmore E-FUEL 10K Manual De Instruccion página 3

CHARGING THE E FUEL 10K:
1. Connect the Micro USB end of the provided cable to the Micro USB port on
the e-Fuel 10K (take care).
2. Connect the USB end to a mains adaptor (not included), each LED indicates 25% charged
CHARGING YOUR DEVICES WITH THE E-FUEL 10K:
1. Press the power button on the side of the e-Fuel 10K
2. Connect the supplied USB cable (or your own) to the USB port on the e-Fuel 10K
3. Connect your device to the other end of the cable, charging will begin automatically
Note: Do not cover the powerbank or your device during charging. Keep out of reach of children.
Extra Safety Protection:
Over-discharge voltage
Over-charge voltage
Over-current
Short circuit
Over-heating
*This powerbank has a fire-resistant coating to prevent malicious or accidental ignition.*
INFO ABOUT POWERBANKS:
For best performance we recommend charging the device fully for 3-4 hours first or until all 4
LEDs are illuminated.
This powerbank o ers a 10,000mAh capacity – the battery capacity of the device you are
charging is dependent on the number of charges you can receive from this powerbank e.g. if your
device has a battery capacity of 3000mAh you should get 3 full charges (assuming you are not
using your device at the same time and it is in flight mode). If your device has a 1500mAh
capacity, you should get 6 full charges from the powerbank (assuming you are not using your
device at the same time, and it is in flight mode).
This powerbank is not suitable for devices that require a 5W charging input, Type C to Type C
charging or PD (power delivery) such as the Apple iPad Pro.
BM PB10EC E FUEL 10K POWERBANK 2