DESCRIPTION
D
escription of the converter.
INSTALLATION
D
etail of the converter installation.
Install the converter in a dry and protected place free from the risk of drip or water projections.
To avoid damage the converter must be firmly fixed.
3,5 x 50
DIN-7971
The converter can be installed on a DIN guide
(6 elements), pressing it lightly.
To extract the converter from the DIN guide,
use a plain screwdriver to lever the flange as
shown in the picture .
Install or modify the equipment without the power
connected.
3,5 x 50
DIN-7971
The installation and handling of this equipment must
be
performed
To install the converter directly on the wall, drill two
holes of Ø6mm. and insert the wallplugs.
Fix the converter with the specified screws.
DIN rail latch release
Autodiagnostic LEDs
Configuration dip switch
V2Plus Bus connection block
Label
Plus Bus connection block
by authorised personnel
DIN 46277
27
.