Idiomas disponibles
Idiomas disponibles
INTRODUCTION
First of all we would like to thank and congratulate you for the purchase of this product manufactured by
Golmar.
The commitment to reach the satisfaction of our customers is stated through the ISO-9001 certification
and for the manufacturing of products like this one.
Its advanced technology and exacting quality control will do that customers and users enjoy with the
legion of features this system offers To obtain the maximum profit of these features and a properly wired
installation, we kindly recommend you to expend a few minutes of your time to read this manual.
SYSTEM CHARACTERISTICS
Protocol converter for the
Permits the installation of Plus general door panels with the
Permits the installation of a Plus coded door panel with
Up to 250 converters per installation.
Up to 32 apartments and 32 "monitor/telephone" elements per backbone.
Up to 120 apartments and 120 "monitor/telephone" elements per backbone with MC-
Simple configuration through easy access dip switches.
Autodiagnostic LEDS that allow detecting installation and/or programming errors.
Connection block for the Plus system with 3+Coaxial installation.
Transceiver module EL564 to convert the twisted pair connection to coaxial.
A multiplexer is required to place the
The V2Plus door panel must have the microprocessor circuit EL500/V2Plus installed, with version 2.00
or later, for its compatibility with the protocol converter and the MC-
Permits the installation of a porter's exchange only on the side of the installation with the Plus system.
Maximum distance between the power supply and converter: 25m, with a wire section of 2.5mm.
The entire installation must be at least 40 cm. away from any other installation.
Install or modify the equipment without the power connected.
The installation and handling of this equipment must be
Use Golmar RAP-2150 cable in the V2Plus system.
OPERATION MODES
Transceiver module for video signal.
The transceiver module for video signal EL-564 converts a
twisted pair to coaxial and vice versa. This module is necessary in
a V2Plus system with a Plus coded panel or Plus general door
panels with a 4+TP installation and to convert the twisted pair to
coaxial, and therefore connect the video signal in the CD-V2Plus
protocol converter of the entrance coaxial.
Installation diagram on pages 33 & 34.
.
V2Plus
system which permits the following functions:
V2Plus
door panel between the converter and the monitors/telephones.
V2Plus
system.
V2Plus
monitors.
V2Plus
multiplexer.
performed
by authorised personnel.
Platea V2Plus Monitors
2
2
2
CD-V2PLUS
M
3 + coax
Porter's
exchange
3 + TP
4 + TP
Central de conserjería
Porter's exchange
3
1
1
2
2
3
Plus coded door panel
4
4
5
5
6
6
o.k.
o.k.
7
7
8
8
9
9
C
0
C
0
ancel
ancel
1
2
3
4
5
6
7
8
9
0
C
Lock release
2
25
V2Plus
riser multiplexer.
2
2
2
FA-V2PLUS
2
EL-564
M
FA-PLUS/C
2
