Idiomas disponibles
Idiomas disponibles
Separating the Vacuum Tube
Removing Clogged Debris
from the Impeller
1.
Turn off and unplug the appliance from the power source
and wait for all moving parts to stop.
2.
Remove the vacuum tube then remove the debris from the
impeller blades.
3.
Check the impeller for any signs of damage. If it is damaged,
contact your Authorized Service Dealer.
4.
Install the vacuum tube, or, if you want to switch to blower
mode, the bottom inlet cover. Refer to
Blower to Vacuum (page 3)
Blower (page 3)
for more information.
g227719
g227720
Converting from
or
Converting from Vacuum to
Service
To best protect your investment and maintain optimal performance
of your Toro equipment, count on Toro genuine parts. When it
comes to reliability, Toro delivers replacement parts designed to
the exact engineering specifications of our equipment. For peace
of mind, insist on Toro genuine parts.
Double-insulated
Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means for
grounding be added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of the system,
and should be done only by the qualified service personnel
at your Authorized Service Dealer. Replacement parts for a
double-insulated appliance must be identical to the parts they
replace. A double-insulated appliance is marked with the words
"Double Insulation" or "Double Insulated." The symbol (square
within a square)
may also be marked on the appliance.
Storage
Store the appliance and extension cord indoors, in a cool dry
location, out of reach of children and animals.
Using the Cord Wrap
Install the cord wrap as illustrated in
5). Wrap your extension cord (cord not provided) around the
appliance, as shown, for ease of storage.
Important:
Always unplug the appliance before wrapping
the cord or storing it.
Troubleshooting
If your blower fails to run when you turn it on, check the following
before contacting your Authorized Service Dealer:
•
Ensure that the bottom inlet cover or vacuum tube is locked in
place.
•
Ensure that the power cord is secured in place at the back of
the appliance and that the plug is fully seated.
6
Using the Nozzles (page
g017267
