Idiomas disponibles
Idiomas disponibles
TFA_No. 35.1134_Anl_05_23
04.05.2023
Wireless weather station
• Once the snooze function is activated, Zz will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
8.2.1 Activate and deactivate the alarm function
• Press the MODE button in normal mode, to turn off the snooze function.
• Press the MODE button again in normal mode, to deactivate the alarm function.
• The alarm symbol and the snooze symbol disappear on the display.
• Press the MODE button in normal mode, to activate the alarm function again.
• The alarm symbol appears on the display.
8.3 Backlight
• Press the SNOOZE-LIGHT button to activate the backlight for few seconds.
8.4 Weather forecast symbols
• The weather station has four different weather symbols (sunny, slightly cloudy, cloudy, rainy).
• The weather symbol is based on the changes of temperature and humidity values of channel 1.
9. Moon phase
• The moon phase of each day is shown on the display.
A
B
C
A: New Moon
D: Waxing Gibbous
B: Waxing Crescent
E: Full Moon
C: First Quarter
F: Waning Gibbous
10. Thermometer and hygrometer
10.1 Trend pointer
• The upper trend pointer on the display will show if the indoor temperature is increasing, steady or
decreasing.
• The lower trend pointer on the display will show if the outdoor temperature is increasing, steady
or decreasing.
10.2 Maximum/minimum function
• Press the UP button.
• MAX appears on the display.
• You can now get the highest value for the temperature and humidity for indoor and outdoor.
Press the UP button again.
• MIN appears on the display.
• You can now get the lowest value for the temperature and humidity for indoor and outdoor. If you
press and hold the UP button for 3 seconds, the values are deleted and reset to the actual value.
• Press the UP button again to return to normal mode.
• The MAX-MIN values are automatically reset at midnight.
10.3 Setting of the temperature unit
• Press the DOWN button on the base station to change between °C (Celsius) or °F (Fahrenheit) as
temperature unit.
18
17:30 Uhr
Seite 10
D
E
F
G
G: Last Quarter
H: Waning Crescent
Wireless weather station
10.4 Comfort level
• On the display appears a face symbol to indicate the comfort level of indoor climate.
Symbol
Temperature
Dry
☺
Comfort
20...27°C
Wet
11. Additional outdoor transmitters
• For having more than one additional outdoor transmitter select with the 1/2/3 switch in the bat-
tery compartment of the outdoor transmitter for each single outdoor transmitter a different chan-
nel. The reception of the new transmitter will be transmitted automatically to the base station.
Press and hold the CHANNEL button on the base station or restart the base station according to
the manual.
• The outdoor values will be shown on the display of the base station. If you have installed more
than one transmitter, press the CHANNEL button to change between the outdoor transmitters.
• Once registered outdoor transmitters (channels), which are no longer needed, can be deleted
manually by pressing the CHANNEL button for three seconds. Once a new outdoor transmitter is
received, there will be another indicator.
11.1 Outdoor temperature alarm for channel 1 - 3
• Press and hold the DOWN button for three seconds in the normal mode.
H
• OFF (default) appears on the display.
• Press the CHANNEL button, to select the corresponding outdoor transmitter.
• Press the UP or DOWN button, to activate the outdoor temperature alarm (ON).
• Press the MODE button.
•
and 70 °C (default) or the last adjusted upper temperature limit appear on the display.
• Press the DOWN button, to adjust the upper temperature limit.
• Confirm with the MODE button.
•
and -50°C (default) or the last adjusted lower temperature limit appear on the display.
• Press the UP button to adjust the lower temperature limit.
• Confirm with the MODE button.
• The alarm is activated. On the display appears
• Press and hold the DOWN button in normal mode for three seconds, to deactivate the alarm func-
tion.
• Press the CHANNEL button, to select the corresponding outdoor transmitter.
• ON will be flashing.
disappears.
• Press the UP or DOWN button.
• OFF appears on the display.
• The alarm function is deactivated.
• Press the MODE button three times, to return to normal mode.
11.2 Case of alarm
• In the case of an alarm a beep will sound at regular intervals.
• The corresponding symbol
• Press and hold the DOWN button, to deactivate the alarm function.
• ON will be flashing.
• Press the CHANNEL button, to select the outdoor transmitter.
• Press the UP or DOWN button.
• OFF appears on the display.
Humidity
<40%
40...70%
>70%
.
or
and the set temperature will be flashing.
19
