Pur Line FRESH AIR 100 Manual De Instrucciones página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
FILTRATION SYSTEM
Filtration system
Antimicrobial pre-filter
Cold catalyst filter
High efficiency HEPA filter
Honeycomb activated
carbon filter
Negative ion
CLEANING AND MAINTENANCE
The lifetime of the filter differs based on indoor environment, usage times and usage location.
To improve the efficiency, please purchase the filter suggested by PURLINE (Ref.: FA100F).
Please make sure the power is cut off before replacing new filter.
Unplug the appliance before cleaning.
Do not use harsh chemicals for cleaning.
No water on the control panel.
Do not flush by water or soak any filter to be used on this product.
Antimicrobial pre-filter should be cleaned by soft brush every half month to clear away the large pollutant, like hairs.
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse directly with
water.
SENSOR CLEANING
Open the protective cover.
Use a slightly wet cotton swab to clean the dust sensor, and a dry cotton
swab to keep it dry.
Close the protective cover.
FRONTAL PANEL / FILTER
Please make sure the power is shut down and the plug is pulled out before disassembling the product.
1. Disassemble the front panel: Hold the top of the front panel, pull the panel out, then lift up the panel.
2. Pull out gently the handle of the filter to take out the pre-filter and HEPA filter.
3. Pull out gently the handle of the filter to take out the active carbon filter.
4. Place the filter in the correct position, and then assemble the front panel.
EN
Function
Filter large particle or hair
Efficiently resolve formaldehyde,
benzene, ammonia gas, TVOC,
sulfuretted hydrogen or other harmful gas
Filter PM2.5, source of allergy, powder,
bacteria, virus and mycete
Eliminate peculiar smell, absorbs harmful gas
Eliminate dust, fresh the air, remove indoor
static electricity for sterilization
7
loading