Premier SOL-5040 Manual De Instrucciones página 10

2.Installation and operation:
2.1Open the box and take out the accessory and machine. Put the solar panel outside and make it face
the sun: connect the cable with the machine indoor, put on the switch. If the cattery voltmeter has
display and red charging indicator is on, it means the solar panel is charging the battery normally.(If this
is the first time you use this machine, please charge for 3 continuous days and then discharge the load)
2.2If the battery voltage is higher than 10.5V,the load indicator will be on. Then insert the LED lamp into
the socket of the DC output on the machine. And insert mobile into the USB connecting port.
2.3This machine has anti-discharging function (prevent battery from discharging to solar panel),.so
please make sure the solar panel is always connected with the machine to assure the battery can get
more power. If you use the battery for a long period. It would cause the battery to low voltage condition
(load indicator off, no load output. The voltmeter showing at 10V).If this happens. Please use the solar
panel to charge the battery for 10 continuous hours and restart the machine to recover the power supply.
2.4If the battery voltage is higher than 14V,the charging indicator begins to flicker, and it means the
battery has been in float charging state.
2.5We have fully considered the using condition of the users. The cables' length for solar panels and
P-3