HP Pavilion PL5000N Manual De Instrucciones página 92

Symptoms
Video
No video
No color
Digitalization of
image or image
freeze up
Normal video
Black box on
screen
Normal video
Intermittent Remote Control Operation
84
HP Pavilion Plasma HDTV User's Guide
Audio Solutions
■
No audio
■
■
■
■
■
■
■
■
Normal audio
■
■
Audio break up
■
■
Wrong audio
■
■
Normal audio ■
Normal audio ■
Check to see if the TV power cord is plugged into a
power outlet.
Try another channel in case of station trouble.
Ensure the remote control codes are properly
programmed.
Check cable connections.
Adjust brightness and audio controls.
Press the Source button to select the correct input
source.
Make sure a PC is not connected with an HDMI
input.
Unplug any HDMI connections and plug them
back in.
Adjust the color settings.
Change the channel.
Reposition the ATSC (digital) antenna.
Check signal meter. If the signal is weak, add a
signal booster to boost the signal strength.
Verify that the audio mode is set to stereo or mono,
not SAP.
Check to see if there is a problem with the audio
setting for HDMI. If so, use analog audio.
Make sure the audio input matches the output. For
example, set the audio of HDMI to linear PCM.
Verify that the CC (Closed Caption) Analog settings
are set to something other than T1, T2, T3, or T4.
Replace the remote control batteries.