Beko SPM6126R Manual Del Usuario página 11

Operation
3
3. After the thermostat indicator
light (10) switches off press the
steam trigger (11).
The
an electronic Anti-
Drip sensor. Steam
amount is adjusted
depending
C
the level of the
temperature. If the
temperature is not
high enough you
may not get enough
amount of steam
when you press the
steam trigger (11).
3.7 Shock steam
WARNING:
the temperature set-
A
ting button to a posi-
tion where the steam
symbol will be be-
tween the " " range.
1. Fill the water reservoir (see. 3.3).
2. Set the temperature setting
button (3) to max. position
by turning it in the counter
clockwise direction.
- Thermostat indicator light (10)
will light up.
Steam Iron / User Manual
product has
on
Set
3. When the appliance reaches the
set temperature, thermostat
indicator light (10) will turn off.
4. After the thermostat indicator
light (10) turns off, you can iron
the garments with the powerful
steam by pressing the shock
steam button (9).
WARNING:
this
A
maintained for a
prolonged time water
may come through
the soleplate (5)
together with steam.
WARNING:
order to use the
A
shock steam feature
the
indicator light (10)
should be turned off.
3.8 Vertical steam
You can also use the shock steam in
upright position (see. 3.7). You can
apply steam to your curtains and
your garments on the hanger with
the steam you will get by pressing
the shock steam button (9). Hold
the appliance 15-30 cm away from
the garment and curtains.
If
process is
In
thermostat
11 / EN