Idiomas disponibles
Idiomas disponibles
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
e) Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g) To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h) When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be
used.
i)
Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.
j)
Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
k) Do not move, adjust or rotate the device in the course of work.
l)
Do not leave this appliance unattended while it is in use.
m) Clean the device regularly to prevent stubborn grime from accumulating.
n) The specified vibrations emission was measured using standard
measurement methods. Vibrations emissions may change if the device is
used in different surroundings.
o) Do not work on two workpieces at the same time.
p) Do not cover the air intake and outlet.
q) Do not run the device when empty.
r)
It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
s)
Keep the device away from sources of fire and heat.
t)
Do not cover the ventilation openings!
u) Keep the device away from excessive moisture or rain.
v) Do not install, remove, adjust or service the discharge screen of any other
parts while the engine is running.
w) When the engine is running, keep all body parts and heavy objects away from
the loading hopper and the outlet chute.
x)
Do not feed cloth, stones, metal, glass, rubber, plastic, bricks, string, roots,
bedding plants, bottles, cans or any other non-botanical objects into the
machine.
y) Rotating cutting blades inside these openings will cause serious personal
injury if touched.
z)
Be careful while working. The machine can eject fragments of processed
material from the loading hopper or outlet chute.
aa) The engine gets very hot during operation. Do not touch the hot engine
because it may cause burns.
