Mode Setting - DPlus Automation Systems Hoop SPOT7 Instrucciones

1.5 MODE SETTING

Choose Mode and press setting button to enter
mode menu, including: Device ID, Door 2 status,
Resident Number, Monitor Time, Indoor unlock
time, Record mode, Device type, Message.
1.5.1 ID DEVICE
Master or Slave Setting For Indoor Monitor
From 01 to 04.
01 means master indoor monitor, 02 to 04
means slave monitor.
1.5.2 DOOR 2 STATUS
Enable or disable the preview of door 2.
1.5.3 RESIDENT NUMBER
Room number setting for indoor monitor from 01-32.
1.5.4 MONITOR TIME
Set monitoring time on indoor monitor, 30s,60s,120s,180s, 300s for option.
1.5.5 INDOOR UNLOCK TIME
Unlock delay setting for door 1, it can be set from 2s-10s, default 2s.
1.5.6 RECORD MODE
Options for recording Video or talking Snapshots. For "Video", when the call button of a Door
Station is pressed, the Indoor Monitor with the MicroSD card will start recording video until the
end of the call, or until setting button is pressed. For "Snapshot", the monitor with the MicroSD
card will automatically snapshot a phone. More snapshots can be manually taken by pressing
setting button.
1.5.7 WORKING MODE OF INDOOR MONITOR
Resident means user (01,02,03,04), admin only one.
1.5.8 MESSAGE
Turn ON or OFF message remider, default is ON. If a visitor calls, he/she will be prompted to
leave a message if the resident is not at home or fails to answer the call.