System Information - DPlus Automation Systems Hoop SPOT7 Instrucciones

1.3.2 TIME
[ Clock switch ]: it means whether display the clock
in standby mode, "on" is to turn on the display, and
"off" is to turn off the display. When you turn off it,
the clock will not be displayed in standby mode.
[ Date Format ]: The date format includes three
formats: YY-MM-DD, MM-DD-YY, and DD-MM-YY.
Move the cursor to "Date Format" and press the
set button. The arrows on both sides of the "Date
Format" option will change color to indicate that
the value can be adjusted. Press the right or left
button to switch the format. After the adjustment
is completed, press the set button again to set the
language successfully.
[ Date and Time ]: The time is displayed in a 24-
hour system.

1.3.3 SYSTEM INFORMATION

System info. Including: firmware version, MCU
version, reboot, SD capacity, format SD.
[ Reboot ]: To restart the Monitor, select
"Confirm" and press . Select "Yes" to the pop-up
prompt to "Reboot device?". Otherwise, select
"No" to exit the window without rebooting.
[ Format ]: Select "Format" button and press "Yes"
to start formatting SD card.
1.3.4 RINGTONE
This menu allows you to change the ring-tone on
the monitor with an installed microSD card
containing suitable ringtone files.
[ Mode ]: There are two mode for ring-tones:
"Custom" and "Default". There are 10 default
inbuilt ring-tones for selection. In the "Custom"
mode, user ringtones can be selected from the
"\USER\Ring" directory on the microSD card.
[ Door1/2 Ring ]: Sets default and Custom
ringtones for each door station. Use and & to
adjust the two settings. Change the mode to
"Custom" for
NOTE:
1. Create a "\USER\Ring" directory on the
microSD card. Only music stored in this ring folder
can be used as Custom ringtones. 2. The ringtone
name must be ring_1~ring_10. 3. The ringtone files
must be in MP3 format.
custom ringtones.