Hkoenig BOE40 Manual De Uso página 4

FEATURES
1. High-quality temperature controller ensures 100% boiling, food-grade plastic material in
accordance with national health standards.
2. With triple safety protection devices, the more precise temperature controller, the safer use,
the longer life.
3. Wireless-type pot body design, 360-degree rotating base to avoid right place, easy to use.
4. Concealed heating element design, high thermal efficiency, long service life, easy to clean.
5. High-polished stainless steel kettle body, lasting beautiful, noble and generous, health and
durable.
6. Heating to boiling quickly after 5-8 minutes after filling with water.
7. know the water level at a glance from a water altitude scale.
8. The indicator light shows that the kettle shuts the power automatically
9. With elegant appearance, unique features, be the fine gift of new friend, catering to
requirement of fast-speed life in the families and living rooms.
USE
1. Boiling water function
Open the lid and full water (not more than the maximum water level 1. 8 L and cannot be less than
minimum water level 0. 8 L), then put on the lid.
Connected the power, the pot body into the power base. Now nothing appear in LCD, which means
the kettle is on standby. When the kettle on standby, only can use the 'I/O', you can use '+' and '-'
buttons.
Method 1: firstly, press '+' or '-', LCD show 40℃. Press '+' or '-' again, choose to set temperature of the
boiling water , and then press 'I/O', LCD flashing constantly means boiling water ;If don't press 'I/O' ,
LCD will not flicker, after 10 seconds , LCD no display, the kettle back to standby.
Method 2: firstly press the' + 'or' - 'button and select the temperature of the boiling water (if only press
'I/O', by default water will be boiled up to 100℃.
LCD show s '100', LCD will keep flashing, into boiling water. When Set the boiling water for 100 ℃, the
water must be 100 ℃.
In the process of boiling water, press '+' or '-', you can reset the temperature. When set temperature is
higher than the actual water temperature, continue to boil water; When the actual water temperature is
up to the set temperature, the heating tube will not work, and electronic board start the time, about 2
minutes later, LED no display, which means the kettle back to standby.
When water is finished boiling, the heat pipe stop working, electronic board start timing, about 2
minutes later, LCD no display, the kettle back to standby. If in 2 minutes, press 'I/O' key, LCD no
display, the kettle back to standby. If press '+' or '-' key, and don't press 'I/O' again, electronic board
All manuals and user guides at all-guides.com
after water boiling.