Panasonic NC-ZA1 Instrucciones De Funcionamiento página 41

Milk system cleaning:
Use this programme when quality of foam is low and when milk residue gets into coffee, espresso or hot water
during espresso machine use.
1
Press
2
Select "Milk system cleaning programme".
3
Fill a glass with 250 mL of water and 7.5–15 mL of milk system cleaner.
Place an empty cup under the dispenser. (Cup size > 250 mL) Then press
to start rinsing cycle for milk system.
• If the milk hose is not attached, attach it to espresso machine. (P. GB21)
4
Fill the glass with clean water and press
again. Place an empty cup under the dispenser before starting. (Cup size >
250 mL)
Display will return to the main menu when
the rinsing cycle is completed.
on the main menu.
Note
• If is pressed, the display will return to the main menu.
Note
• If is pressed , it immediately stops the
rinsing process.
After flashes, the display will show the
following display.
Note
• If is pressed, it immediately stops the rinsing process.
After flashes, the display will return to the previous display.
to start the rinsing cycle
GB41