Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
P
R
O
B
L
E
M
No power when
POWER is on
No power when
plugged in
No sound when
playing audio via
Bluetooth
No sound when
playing audio via
AUX IN
Sound comes from
only one speaker
when playing audio
via AUX IN
The person whom you
call via speakerphone
cannot hear your
voice clearly.
P
O
S
S
B I
L
E
C
A
U
AC/DC adaptor is not plugged into a
wall outlet or the connector is not
plugged into the power supply jack
on the back of the unit.
The AC outlet may not have power.
Your Bluetooth device has not been
paired properly.
The volume control of your Bluetooth
device is set at too low.
The volume control of the Bluetooth
speaker is set at too low.
Audio cable has not been connected
properly.
Audio cable has breakage.
The volume control of your Bluetooth
device is set at too low.
The volume control of the Bluetooth
speaker is set at too low.
Mono audio cable is used.
The audio cable was damaged.
You are not facing to the front side of
the Bluetooth speaker.
You are too far from the Bluetooth
speaker.
21
S
E
Plug the AC/DC adaptor into a wall
outlet and plug the connector into
the supply jack on the unit.
Check the outlet with a working
lamp or other electrical appliance.
Pairing your Bluetooth device
according to the "PAIRING YOUR
BLUETOOTH DEVICE" section.
Increase the volume of your
Bluetooth device.
Increase the volume of the
Bluetooth speaker by pressing the
Volume "+" button.
Check the connection of audio
cable at the Bluetooth speaker and
the audio device.
Use another audio cable for
connection.
Increase the volume of your
Bluetooth device.
Increase the volume of the
Bluetooth speaker by pressing the
Volume "+" button.
Make sure the audio cable is a
stereo type.
Replace the audio cable of stereo
type.
Face to the front side of the
Bluetooth speaker.
Close to the front side of the
Bluetooth speaker.
S
O
L
U
I T
O
N
