Idiomas disponibles
Idiomas disponibles
3.
Turn on Bluetooth functionality on your device and make it discoverable (see your device's instruc
-tions to add or setup a Bluetooth device).
4.
Select ABT-52 on your Bluetooth device to make the pairing when it is found. If your device asks for
a passkey, enter 1234 on the keyboard of your device. If no device is paired till 2 minutes, the unit
will power off (switch to standby mode) accompanying by a long beep. If this occurs, retry step 1 - 4.
5.
Once paired with a device, a blue light on the STATUS indicator will glow steadily and two beep
sound confirms that pairing is completed. On some devices, you must then select "use as a stereo
audio device" or similar on the device's Bluetooth menu. Once paired, your device should connect to
the ABT-52 whenever within the Bluetooth range (10 metres).
To connect previously paired Bluetooth device
1.
Your Bluetooth speaker can store one previously paired device for quick pairing during power on.
2.
To connect a previously paired device after power on, if the previously paired device is found with
the range, the unit will pair the device automatically and the STATUS indicator will turn to BLUE
steadily. Two beeps will confirm the pairing is completed.
To connect a new Bluetooth device
1.
If no previously paired device is found with the Bluetooth range (10 metres) after power on, the
STATUS indicator would continue to flash in BLUE for 2 minutes before switching to standby mode.
2.
During this period, you can pair a new Bluetooth device. You can start the pairing process manually
by pressing and holding the
and BLUE alternatively again to indicate pairing attempt is in process. Please follow step 3 - 5 in
"To begin pairing with a Bluetooth device" section to complete the pairing of a new Bluetooth
device.
NOTE:
Due to different operating system of Bluetooth devices, the time taken by pairing process might be
different. If the pairing cannot be successful in the first time, please try to restart the pairing process
by pressing and holding the
alternatively.
The pairing time might be longer for the first time pairing or pairing a new Bluetooth device.
Make sure you have the latest firmware for your Bluetooth mobile devices.
Make sure your device is working properly. Check your device's manual for details on Bluetooth
pairing and linking.
PLAYING MUSIC VIA BLUETOOTH
To listen to music streamed wirelessly from your paired Bluetooth device.
1.
Following the "PAIRING YOUR BLUETOOTH DEVICE" section to connect your Bluetooth device.
2.
Start the audio playback and adjust the volume output on your Bluetooth device.
button on the unit until STATUS indicator would flash in RED
button again until the indicator light flashes red and blue
18
