Idiomas disponibles
Idiomas disponibles
3.
Press and release the
press and release this button for resume the playback. You may also pause and resume the
playback on your Bluetooth device.
NOTE: It is not recommended to pause the audio playback by press and release the
on the unit and then resume the playback on your Bluetooth device as it may have abnormal
response for some Bluetooth devices.
4.
Use the Volume +/- Buttons on the unit to adjust volume.
5.
When done listening, press and hold the
standby mode).
USING THE SPEAKERPHONE
To use your Bluetooth speaker as a speakerphone for receiving a phone call from a Bluetooth enabled
phone.
1.
Following the "PAIRING YOUR BLUETOOTH DEVICE" section to set up the bluetooth connection.
2.
When a call is received during music is playing, music will be muted to hear the ringtone. STATUS
indicator will flash in RED color to indicating the incoming call. Press the
the call, or press the
NOTE: The voice from the unit will be in "MONO" mode when the Speaker phone is being used
and only the right hand side speaker will sound.
3.
Use the Volume +/- Buttons to adjust the desired volume level.
4.
When the call is completed, press the
function or music playback.
NOTE:
The position of the built-in microphone of the unit is on the central of the front side. You are
recommended to face the front side of the unit and at a short distance in order to have good voice
quality and clarity.
USING THE AUX IN JACK
1.
Plug one end of the AUX IN cable (supplied) into the headphone jack (or audio out) of your audio
device and the other end into the AUX IN jack of the unit.
2.
Press and hold the
3.
Use your audio device to control music playback and volume through the unit.
4.
Use the Volume +/- Buttons to adjust the desired volume level.
5.
When done listening, press and release the
standby mode) and unplug the AUX IN cable from the unit. Remember to turn off your audio device,
too.
Button to pause the audio playback from your Bluetooth device and
Button for 2 seconds to turn the unit off (switch to
Button to ignore the call.
Button to end the call and resume previous
Button for 2 seconds to turn on the unit (release when blue light appears).
19
Button for 2 seconds to turn the unit off (switch to
Button
Button to answer
