ENGLISH
•
The trimmer has a 5 minute quick charge feature that will provide enough charge for 1
grooming session.
ATTACHMENTS
TO FIT AND REMOVE ATTACHMENTS (FIG. A)
Ensure that the device is switched off before fitting or removing attachments.
•
To remove, rotate the attachment anti-clockwise until it unlocks and then lift it off.
•
To fit, place the desired attachment on top of the device and rotate the attachment
clockwise to lock it into place.
FITTING AND REMOVING FIXED GUIDE COMBS
To Fit
•
Hook the front of the guide comb over the blade.
•
Press the back of the guide comb down until it clicks into place.
To Remove
•
Lift the tab on the back of the guide comb upwards until it comes free from the blade.
ADJUSTABLE STUBBLE COMB (FIG. B)
•
Fit the adjsutable stubble guide comb in the same way as you would fit a fixed guide
comb.
•
The 1.0 - 5 mm comb can be adjusted in 0.5mm increments simply by turning the
wheel to the desired setting. Turn the wheel clockwise for longer length and
anticlockwise for shorter length.
•
The indicator on the wheel will point to the chosen setting.
•
Use the trimmer without the adjustable comb for trimming hair close to the skin. This
will trim hair to 1.0 mm, holding the blades perpendicular to the skin will trim hair to
0.5 mm.
BODY HAIR COMB (FIG. C)
•
Clip the desired body hair comb over the body hair attachment.
INSTRUCTIONS FOR USE
•
Comb facial hair with a fine comb before you start trimming.
•
Comb your hair in the direction that it grows so that the hairs are at their maximum
height and facing in the same direction.
•
After trimming, lightly go over the trimmed areas with the foil to get a smooth clean
finish.
•
Since all hairs do not grow in the same direction, you may want to try different
trimming positions (i.e. upwards, downwards or across) for better results.
•
Hair should be dry and free from any waxes or lotions.
•
If hair builds up during use, switch the unit off, remove any attachment in use and
clean any excess hair clippings from the attachment and groomer.
6
