Idiomas disponibles
Idiomas disponibles
Set-up: Place your turntable in a secure location where it will be protected from the
elements or possible falls.
Power connection: Connect the power by 5V DC adaptor.
Lift the dust cover: The dust cover can put down when you play the vinyl record.
Turn on: Turn on the Power Switch, note that this also controls volume.
Enter into the phono mode: Press the "Play mode select key" to enter in to the PHONO
mode
Speed selection: Select the speed between 33, 45 and 78 rpm through speed switch
according to the speed of vinyl record.
Insert the vinyl record (Not include): Carefully remove the vinyl record from its case and
place the record on the turntable plate.
Move the needle: Take off the protector of needle, release the tone arm lock and lift up
the tone arm by arm lifter, slowly and gently move the needle over the record, placing it on
the outermost part of the record.
Drop the needle: Once the needle is over the record, use the arm lifter press down the
tone arm and put the needle under the record.
Enjoy your music: Once above steps are completed, then the vinyl record will start
playing. (the turntable will stop automatically if the auto-stop switch is in the ON position
when the needle has reached the end of the vinyl record . If the switch is in the OFF
position then it will keep revolving until the tone arm is moved.)
FINISHING UP: Lift up the tone arm and put it on the rest position when finished, turn off
the Power Switch.
Connecting to an external sound system: Connect an RCA audio cable (not supplied) to
the AUDIO LINE OUT sockets on the rear of the turntable. Connect the other end of the
cable to an AUDIO INPUT on the amplifier.
-Red plug into R channel output.
-White plug into L channel output.
USB/TF function: (lift up the tone arm and put it on the rest)
-Insert your USB disk or TF card.
-Wait for few second, USB or TF music will begin.
-Under this function, other functions will stop automatically.
-If you want to play the recorded music, short press "M" after USB/TF work.
USB/TF recording:
-Press the "Play mode select key" to enter in to the PHONO mode.
-Insert the USB stick or TF card and hold down the "M" key until "REC" appears on the
screen, then press the "PLAY/PAUSE" key to start recording, the "REC" will flashes while
recording.
-Hold down the "M" button until "STOP" appears on the screen, then press the
"PLAY/PAUSE" key to stop recording.
-If you want to play the recorded music immediately, short press "M" button enter into
"USB/TF" mode and click the "Previous music" button, then it will begin to playing.
Bluetooth function: (lift up the tone arm and put it on the rest)
-Enter into Bluetooth mode directly after turn on this device. Press "M" key to select
Bluetooth mode under the other mode.
-Make sure the available Bluetooth device into "pairing mode".
-Choose and click the right Bluetooth name to connect.
Fm function: (Lift up the tone arm and put it on the rest)
Press "M" key to select FM mode.
-Long press "PLAY/PAUSE" for AUTO SCAN, short press "PLAY/PAUSE" for STOP SCAN.
Delete the current music: When you want to delete the current music, press and hold the
"PLAY/PAUSE" button till display"DEL" and click the "PLAY/PAUSE" button once again to
confirm, the currently playing music will be removed.
Aux in function: (Lift up the tone arm and put it on the rest)
Insert Aux in cable (Please note other functions will not work while cable is inserted).
6
