Idiomas disponibles
Idiomas disponibles
11. Once the previously selected amount of coffee is reached,
the appliance will stop automatically;
12. If you want to stop the appliance before grinding is fin-
ished, press the start grinding button again;
Please note:
Stop grinding if the ground coffee reaches the max level.
13. Remove the pre-ground coffee container, gently tap the
container, remove the lid and pour the pre-ground coffee
into the filter of the coffee machine. If you don't use all the
ground coffee, it can be stored in the container, closing
the cap (A11) to avoid loosing aroma.
Always empty the ground coffee container before using the
appliance again.
7.2 Grinding directly in the filter holder
1. Prepare the coffee beans container as illustrated in steps 1
to 6 of the previous paragraph;
2. Extract the filter holder accessory's box (A6) from its
housing (fig. 8);
3. Extract the filter holder accessory (A7) (fig. 9);
4. Insert the accessory to the appliance, pushing it as far as it
goes: the corresponding light comes steady on the display
(fig. 10);
Please note:
•
When using the filter holder accessory, you can not
choose the number of the cups: you can only grind coffee
for 1 or 2 cups of espresso;
•
When using the filter holder accessory, turn the grinding
selection regulator (A3) to number 1 or 6 of the "ESPRES-
SO" section.
Note: do not grind beyond number 6 to avoid to overfill
the filter holder.
5. Insert the filter holder to the accessory (fig. 11). It is rec-
ommended to hold in place the filter holder, as the acces-
sory is suitable for standard dimensions and do not cover
all the models;
6. Push the start button (B1) (fig. 6): to grind the 2-cups
quantity, push two times the start button within 1 second
after the grinding starts;
7. Grinding automatically stops: if you want to stop it earlier,
press the start button once again;
8. Extract the filter holder and proceed preparing espresso
coffee.
8. TIPS
•
Always close the beans coffee container to maintain the
taste and aroma of the coffee beans.
•
Only grind the coffee quantity for the single preparation.
•
Never overfill the coffee beans container. As a rough
guide, use a tablespoon of beans per cup (e.g. 4 table-
spoons of beans for 4 cups of coffee). As you use the grind-
er, you will of course discover the optimum quantities for
your own personal taste.
•
After 2 preparations consequently, wait 15 minutes be-
fore next use.
•
To ensure good quality in terms of coffee freshness, al-
ways clean the appliance after each use. It is not advis-
able to grind oil beans.
9. PROGRAMMABLE SETTINGS
9.1 Programming grinding time with the filter
holder accessory (A7)
1. Insert the filter holder accessory;
2. Insert the filter holder of your coffee machine;
3. Push the start grinding button (A1) and keep it pushed:
the grinding starts and the cup symbol flashes fast to in-
dicate that the appliance is in programming mode;
4. Once reached the coffee quantity, release the button: the
appliance stops grinding and the time for 1 espresso cup
is programmed.
Please note:
•
To avoid excessive quantities, the max programmable
grinding time is about 7 seconds.
•
It is possible to program the 1-cup quantity: when prepar-
ing the quantity for 2 cups, the appliance grinds a double
quantity.
9.2 Display contrast
The display can be set on 5 different levels of contrast:
1. Switch the appliance on by pressing the ON/OFF button
(A9);
2. Extract the ground coffee container (A12) or the filter
holder accessory (A7) (if inserted);
3. Press one button: on the display appears the current num-
ber of the contrast level (fig. 16);
4. Press the buttons to increase or decrease the contrast;
5. Once selected the desired contrast, insert the ground cof-
fee container of the filter holder accessory: the appliance
is ready to use.
13
