Tabla de contenido
Idiomas disponibles
Idiomas disponibles
available for the refrigerator compartment. When the Holiday function is enabled, the
freezer compartment operates normally.
Smart ECO
When Smart ECO is enabled the temperature is set to +4°C in the refrigerator com-
partment and to –18°C in the freezer compartment. These are optimal temperature
settings. To enable or disable Smart ECO, touch the "Function" sensor repeatedly to
cycle through available functions. When the Smart ECO icon flashes, touch "OK" to
confirm.
Note: If you do not touch "OK" within 5 seconds, the function will not be activated.
Smart ECO will be deactivated when you enable the Holiday or Rapid Freezing func-
tion.
Open door alarm
If the door remains open for more than 3 minutes, you will hear beeping. Touch any
sensor on the control panel to mute the beeping. After another 3 minutes, you will
hear beeping again. Beeps will continue until you close the door.
Non-volatile appliance settings and compressor protection
In the event of a power outage, the appliance settings will not be reset. When the
power is restored, the appliance will operate with the same settings as before the
power outage. If the power is restored within less than 5 minutes, the compressor will
start with a delay. This prevents damage to the compressor.
Elevated temperature alarm
If the temperature inside the freezer compartment is higher than –10°C when you
plug in the appliance to power, the freezer compartment temperature will flash on
the display. The temperature will stop flashing after a few seconds or when you touch
any sensor on the control panel.
Error Codes
Contact the service centre when E0, E1, E2, EH or EC appears on the display.
Child Lock
The appliance features a child lock safety device. The Child Lock function is es-
pecially useful when cleaning. The Child Lock function is activated automatically 3
minutes after you last used the control panel or opened or closed the door. Touch
and hold the Child Lock sensor for 3 seconds to deactivate the Child Lock
Inverter icon
This icon displays the status of the compressor. When the compressor is running,
the symbol lights up. When the compressor stops working, it will automatically go
out.
55
Tabla de contenido
