S&P MP-EMIDUAL Instrucciones De Uso página 8

ENGLISH
Infrared Remote Control with Integrated Display
DESCRIPTION
The MP-EMIDUAL remote control is made up of:
An infrared transmission device;
4 control buttons for power, selecting the various functions, and setting them;
STAND-BY:
increase the autonomy of the batteries.
FUNCTION:
necessary settings.
MODIFY: To set the desired values.
A large multifunction display showing the various types of information;
CHRONO: The display shows the set time and day.
P1-P2: personalised programmes for automatic operation.
COMFORT: Comfortable temperature.
ECO: Energy saving temperature.
ANTIFREEZE: Temperature set at 7±3°C.
INSTALLATION
The device is equipped with a wall bracket. The programming takes place by means of
the manual transmission of data and, therefore, it is not necessary to install the device
within the visible range of the receiver;
For installation, use the plugs and screws supplied. The holes in the walls must have a 4
mm diameter and be at least 20 mm deep.
For rapid and simple programming of the device, we suggest following this guide:
To turn the remote control off when it is not in use and
To navigate through the various menus and make the
8