Panasonic CS-PS36RKV Instrucciones De Operación página 17

To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
To adjust vertical airflow
direction
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swings up/down automatically.
• Do not adjust the louver by hand.
Powerful or Quiet operation
POWERFULQUIETCANCEL
Powerful
 Used when you want to cool down the room
quickly.
1
Press the button once to activate the
"POWERFUL" mode. The "POWERFUL"
indicator on the indoor unit is illuminates (Red).
Quiet
 Used when you want to quiet down the unit.
2
Press the button once again to activate
the "QUIET" mode. The "QUIET" indicator on the
indoor unit is illuminates (Green).
Cancel
3
Press the button once again to
cancel the powerful or quiet function. The
"POWERFUL" or "QUIET" indicator on the
indoor unit is no illuminate.
Note: When the powerful/quiet function be
activated, the indoor unit "POWERFUL" or
"QUIET" indicator will be illuminated, but
there is no indicator for this function on
remote control screen.
Note: When unit in dry mode( anyway by manual
selection or AUTO mode judgement),the
POWERFUL and QUIET function will can not
be operated.
SLEEP mode operation
 Used when want to control temperature and
fan speed for sleep.
1 Press the
button to set the unit
operate in sleeping mode (the
indicate on remote control screen). In sleep
mode, when the temperature and fan speed
setting are not suitable for you, you can
reset the temperature and fan speed.
2 Press
again to cancel the sleeping function.
Note: When the sleep function be activated, the
remote control screen will indicate
But there is no indicator for this function
on indoor unit.
AUTO DRY FINISH operation
 Used when you want to dry the indoor unit.
1 This function is available both in Operation
or Standby Mode.
Press to start this function, the re-
mote control shall display as follow
2 When this function is operation, you can
press to stop immediately. Otherwise
it will automatically end this function after 10
minutes, and return to the previous operation
mode.
Note: When this function be activated, the
remote control screen will indicate
, but there is no indicator
for this function on indoor unit.
will
.
17