Idiomas disponibles
Idiomas disponibles
6. Inserting batteries in the remote control
The remote control contains a CR2025 3V lithium battery.
The first time you use the re-
mote control, pull off the trans-
parent film without opening the
battery compartment.
Replace the battery if the device fails to re-
act to commands from the remote control
properly. Then follow these steps:
Press down the locking tab (b) and pull
the battery holder with the battery (a)
out from the remote control. Dispose of
the old battery in accordance with legal
regulations.
Place a new CR2025-type 3 V battery
in the holder (c), with the positive pole
pointing upward. Check the battery po-
larity is correct.
Slide the holder with the new battery
completely into the slot (d) in the re-
mote control.
154
b
a
d
c
