DHC BT797 Manual De Instrucciones página 9

RECHARGE & RETEST
*Battery is discharged, the battery condition
cannot be determined until it is fully charged.
Recharge & retest the battery.
BAD & REPLACE
*The battery will not hold a charge. It should be
replaced immediately.
BAD CELL & REPLACE
*The battery has at least one cell short circuit. It
should be replaced immediately.
LOAD ERROR
*The tested battery is bigger than
2000CCA/SAE or 200AH. Or the clamps are
not connected properly. Please fully charge the
battery and retest after excluding both previous
reasons. If reading is the same, the battery
should be replaced immediately.
14. SOC & SOH Display: Press directional keys to see SOC & SOH:
GOOD & PASS
SOC: xx.xx V
15. Press the ◄ ► key to select result printing:
YES or NO. Press «ENTER» to confirm your
choice.
16. Press «ENTER» return to MAIN MENU or remove the test clamps from the
battery posts after completion of testing batteries to end test.
90%
9
RECHARGE &
VOL:
CCA:
IR:
BAD & REPLACE
VOL:
CCA:
IR:
BAD CELL &
VOL:
CCA:
IR:
LOAD ERROR
GOOD & PASS
SOH:
PRINT RESULT?
9
9
RETEST
xx.xx V
xxxx CCA/SAE
xx.xx mΩ
xx.xx V
xxxx CCA/SAE
xx.xx mΩ
REPLACE
xx.xx V
xxxx CCA/SAE
xx.xx mΩ
xxxx CCA/SAE
90%
YES/NO