Appliance Wall Hang - Aparici SIE150N Manual Del Usuario Y Del Instalador

ES_EN_FR_IT_PT
fig.-1 – Model APARICI SIE150N/SIE200N
1.- BUILDING-IN.
The water heater shall be built-in as close as possible to the
outlets in order to reduce the heat loses.
The building place must be chosen considering the maximum
reduction of 90º elbows in water connections and, at the same time, make
easy the substitution of the heating element.

2.- APPLIANCE WALL HANG

Due to its particular design, the APARICI electrical water heaters
could be installed in three positions as you could see at fig-2:
3. Vertical. At this position cold water inlet pipe (F) is on the right
side and hot water outlet pipe (C) on the left side.
4. Horizontal right and left wall. In this case inlet cold water pipe (F)
will be placed every time in the bottom pipe and hot water outlet
pipe (C) in the upper part.
16