Operating Modes; Keys And Functions - WIKA LSD-30 Manual De Instrucciones

6. Commissioning, operation

6.2 Operating modes

System start
Display is fully activated for 2 seconds.
■
GB
When the level switch is powered up within the range of the hysteresis, the output switch is set to "not
■
active" by default.
Display mode
Normal operation, display of the level
Programming mode
Setting the parameters

6.3 Keys and functions

The level switch has two operating modes, the display mode and the programming mode. The selected
operating mode determines the respective function of the key.
18
Jumping into the programming mode
Keep the "MENU" key pressed for approx. 5 seconds. If the password is set to ≠ 0000, a
password will be requested first-hand. If authentication is successful, then it enters the
programming mode, otherwise it reverts to display mode.
Returning to the display mode
Simultaneous pressing of both keys.
WIKA operating instructions level switch model LSD-30